|
SI-UltraTac 255 Pressure Sensitive Adhesive is a pressure sensitive adhesive that should only be applied under flooring materials that require this type of adhesive, such as VCT, carpet tiles and similar materials only.
The working time for SI-UltraTac 255 is 10 hours and is a specially formulated high solids water-based acrylic adhesive. Apply flooring materials when adhesives become clear. |
SI-UltraTac 255 carries all the warranties, 5 years up to 8lbs.
SI-UltraTac 255 is safe to use as it is solvent free, non-flammable, does not contain hazardous volatile organic compounds (V.O.C.) per OSHA CFR 1910:1200 and has a very low odor.
SI-UltraTac 255 will not re-emulsify when installed properly with adequate time to totally set up. It's easy to use, and there is no certification process or major time delays as with other systems.
The
adhesive manufacturing industry has established 11 quality control
standards for manufacturers. SI-UltraTac 255 rates as
superior in all 11 standards and adds 2 new
standards, which no other company is currently providing.
1. **** AGING
–
SI-UltraTac 255
maintains
ultimate performance with Hi-Tack regardless of age.
2.
**** BRIDGING – SI-UltraTac 255 has tested superior for gaps and dips between two substrates.
3. **** ADHESION
– SI-UltraTac 255 has equal to or more strength of bond than competitive adhesives.
4.
**** WETTING –
SI-UltraTac 255 maximizes
the points of contact between adhesive and
substrate.
5.
**** COHESION – SI-UltraTac 255' s internal strength to bond to itself is excellent.
6. **** OPEN
TIME – SI-UltraTac 255 is
superior at open-time. (10 hours when laying VCT)
7.
**** CONTROLLED ABSORPTION –
SI-UltraTac 255™ surface
attachment is a key element contributing
to success.
8.
**** CONSISTENCY/VISCOSITY – SI-UltraTac 255™ exhibits
excellent ability to spread
and ease
of application
even on vertical surfaces.
9.
**** MILDEW RESISTANCE – SI-UltraTac 255™ is
mildew resistant, preventing bacteria and contamination.
10.
**** LEGGING – SI-UltraTac 255™'s
ability to tenaciously bond is excellent and will
not dead set.
11.
**** FREEZE/THAW RESISTANCE – SI-UltraTac 255™
has been tested to freeze/thaw 5 times and still
be stable and holds a bond at zero degrees.
The two additional
standards that no other manufacturer offers:
12.
**** MOISTURE RESISTANT
– SI-UltraTac 255™ is moisture resistant with stability to
8 lb of moisture emissions.
13.
**** WARRANTY
– SI-UltraTac 255™ has a 5-year warranty.
Product performance
rating scale:
* - Unacceptable
/ **- Below Standard
/ *** - Standard
/ **** - Superior
Standard
At the time of publication Sealflex Industries, Inc. is not aware of any other manufacturer offering a 5 year warranty with a stability of up to 8 lb of moisture resistance.
