|
MOISTURE RESISTANT to 11.5 lb
 Nineteen years of research, development and exhaustive field testing has proven that this membrane contains a technologically advanced moisture resistance formula not available from any other manufacturer.
This
monolithic system is environmentally safe and water-based. It
disperses, regulates, and controls vapor, protecting the bond
integrity of modern laminated flooring. It's high quality properties create flexibility with
expansion and contraction while retaining its laminate bond, alkali
stability, mildew-resistant moisture disbursement and continued
wet adhesion.
It is the only product that has ever been specifically
developed, tested and proven to reduce moisture vapor emission to safe, acceptable levels so flooring materials will not
buckle, warp or release from concrete
due to moisture.
SealflexTM Membrane System is the leader
in technology, service, price and value.
NOTE:
Only Sealflex certified installers may install Sealflex Membrane
System. Please contact us for certification information.
PERFORMANCE
Sealflex Membrane System
is reliable and predictable in performance. This is a result
of years of careful product development. Sealflex Membrane System
does not replace exterior waterproofing products such as membranes,
French drains and materials applied to the perimeter walls for
waterproofing. A scientific test is available to specifically
prove the amount of vapor emissions emitting from a concrete slab
that can determine if the slab will accept or reject flooring
materials prior to a floor being applied.
Test results and performance
under actual use since 1984 prove Sealflex Membrane System to
be the only effective long term solution to the problem of moisture
vapor emission by preventing problems with applied flooring materials.
COMPOSITION
and MATERIALS:
Sealflex Membrane System is a three-part applied system. The first
part consists of a chemically treated fibermat sheet, 50 in. wide.
The second and third parts consist of water- based acrylic polymers
and resins. Sealflex Membrane System meets all V.O.C. specifications.
It is non-flammable and non-toxic. No mixing of material is required.
Characteristics and
uses
Sealflex Membrane System is a monolithic
membrane system applied to concrete surfaces to reduce moisture
emission. It is a three part applied system. Part 1 is a chemically
treated fiber mat sheet. Parts 2 and 3 consist of water based
acrylic polymers and resins.
Advantages
Sealflex Membrane System remains flexible and maintains its laminate bond
with the expansion and contraction of the concrete slab.
Provides
an insulation between concrete and flooring materials of 10°
- 15°
F, permitting moisture to wick-out and dissipate laterally throughout
the system.
Provides an anti-fracture membrane for hard surface applications
Limitations
Indoors
use on concrete only. Does not protect flooring adhesives from
water from above.
Types and sizes
One system for any size
floor area with moisture conditions up to 11.5 lb.
Uses
and potential uses
Applied
to concrete slabs to prevent finished flooring systems from delaminating
due to moisture vapor emission. Can be used as a unique floor
surface in itself (usually in warehouses or work areas). Forklift
and auto traffic okay. Will make walking on concrete easier and
safer.
Design
rational
With the federal mandate that solvents
and asbestos be removed from flooring adhesives, moisture related
flooring failures escalated greatly. The Sealflex Membrane System
was developed to give flooring contractors a surface to bond to
without fear that the finished floor would delaminate, buckle,
or warp due to moisture.
Rated
capacity
Sealflex Membrane System is warranted
for 10 years when applied by certified installers, in accordance
with Sealflex specifications, to a concrete slab emitting less
than 11.5 lb of moisture per 1,000 sq ft of surface per 24 hours.
Expected
useful life
10 years, minimum.
Installation
methods and installer requirements
Sealflex Membrane System should
only be applied by certified installers who have been trained
and certified onsite by Sealflex Industries, Inc.
The
chemically treated fiber mat is rolled onto the prepared concrete
surface. Sections of the fiber mat are butted. The base coat is
applied with a roller, using pressure to penetrate through the
fiber mat to the concrete, creating a bond. A special fiber mat
roller is used to apply additional pressure and to roll out veins
and bubbles, assuring a good bond. Dry time is approximately 3-4
hours. The finish coat is also applied with a roller. Dry time
is approximately 3-4 hours.
Application
time for 2300 sq ft by two men in an open area is about 8 hours
for the fiber mat and base coat and about 3-4 hours for the finish
coat.
Initial
cost
Determined by the certified installer.
Long
term cost
None beyond the initial cost.
Delivery
time
Three weeks when training and certification
is involved. Can be less than a week otherwise.
Sources
of supply
Sealflex Industries, Inc. sells to certified installers only.
Contact Sealflex Industries, Inc. for names of certified installers
in your area or for certification information.
Storage
requirements
Do not allow to freeze. A standard
unit, which covers 1500 sq ft, is 50". A small unit, which
covers 900 sq ft, is 30".
Location
of displays or samples
Literature and samples may be obtained
from Sealflex Industries, Inc.
Interface
with other products
All types of finished flooring
systems may be installed over Sealflex Membrane System. Rubber,
VCT, sheet vinyl, ceramic tile, epoxy.
Specifications
- How, Where, and Why
Sealflex Membrane System is specified
for application to concrete slabs emitting moisture vapor in excess
of 3 lb per 1,000 sq ft per 24 hours, for the prevention of delamination
or damage to finished flooring systems due to excess moisture.
Available
information for suppliers
- Product literature and samples
- Sealflex Industries, Inc.
- Sweets Product News.
Trade
jurisdictions
Certified installers are located
across the United States and Canada. Contact Sealflex Industries,
Inc. for names in your area.
Environmental
and energy concerns
Sealflex Membrane System meets
all VOC requirements, is non-toxic and non-flammable.
|
